Custom Motorcycle Helmets – Ultimate Guide

Are you on the hunt for custom motorcycle helmets? Or you are tired of owning the same-looking helmets; we have good news for you.

In this ultimate guide, we will highlight the most innovative ways to customize motorcycle helmets. It will help you construct a specialized or customize helmet according to your preferences.  After considerable research, we have round up the five best ways to customize your motorcycle helmet.

There are numerous ways you can make a helmet unique – You can airbrush it, custom paint it, or apply a sticker to make the gear awesome.

Let us unveil the 5 best ways to customize your motorcycle helmet:

  • Custom Paint Your Helmet
  • Apply A Sticker
  • Get A Helmet Skin
  • Pinstripe A Helmet
  • Airbrush Your Helmett

Without further ado, let’s see how to make a custom motorcycle helmets.

CUSTOM PAINT YOUR HELMET

It is no secret; painting a helmet is a great way to express your personality and sense of elegance. Custom paint your motorcycle helmet can transform this vital piece of safety gear into a gorgeous accessory.

Custom painting your helmet can also save your old helmet from deteriorating and give it a new look.

Before you start painting and customizing your motorcycle helmet, let us highlight the few tips that will help you create a one-of-a-kind helmet. 

  • Find the quality paint
  • Arrange all the tools
  • De-assemble the helmet
  • Clean the Outer Shell
  • Apply the paint

Find the Right Paint: It is recommended to select a paint that is approved by the manufacturer of your helmet. The reason is –the solvents in paints may weaken the outer shell, and you can commit irreversible damage to your helmet.

Always check the tags and labels and try to find out any warnings about the type of paint that should avoid.

Arrange all the Tools: Once you determine the right paints, you will need to get the proper tools to de-assemble the helmet parts. The tools required to prep include screwdrivers, rags, sandpaper, gloves, tack cloth, and cleaning solutions. 

For the professional painting, you will need a spray gun and compressor or some other painting tools, like a brush. You’ll also need tape to guard the parts you can’t remove that don’t need paint.

De-assemble the Helmet: Now remove all parts you won’t paint, including the air vents, visor, and a chin strap.  You can use a screwdriver or pop out some of these pieces.

Clean the Outer Shell: The next step is cleaning the outer shell; it is good to use either acetone based cleaner or soapy water. It will thoroughly clean the outer shell and wipe out all residues, including grease, debris, and more. Now let the helmet air dry for a while.

Apply the Paint: Now, you are ready to apply the paint. It is best practice to use light layers in a slow and even motion to avoid drips.

Go from left to right or up and down across the outer shell, but choose only one; otherwise, you will criss-cross, and the paint will look uneven. Make sure to paint in a well-ventilated area and let it air-dry completely.

APPLY A STICKER

A sure and the quickest method to customize your helmet according to your choice are by directly applying stickers or decals.

There are numerous designs of custom stickers available in the market. You can pick out from different colors, styles, to final designs that you love.

Before applying any helmet sticker, make sure it’s outer-shell is clean and dry. You can clean it up by greasing. Otherwise, the accumulated dust will affect proper adhesion.

It is no doubt, creating custom motorcycle helmets through stickers is quite an easy and time-saving task. And the good news is customer stickers are available at an affordable price point.

GET A HELMET SKIN

Another way to get custom motorcycle helmets instead of getting it painted or applied with decals is by actually put on the helmet skin to make it customized.

You may or may not know, what is the difference between Helmet Skin & Sticker?

Let us clear the ambiguity between these two terms.

In simple words, stickers or decals are smaller in sizes and do not cover the entire body. A label or decals could be a small number, an image, or a letter, and more.

On the other hand, a skin can cover the entire helmet to replace or cover the original color.

Benefits of Helmet Skin:

  • It protects your helmet from scratches and external damages
  • It keeps the original color of your helmet
  • It gives you overwhelming customization

PINSTRIPE A HELMET

Ultimate Guide To Motorcycle Helmets review by pickhelmet

The other innovative way to customize your motorcycle helmets is Pin-stripping. Pin-striping is the application of a thin line of paint or other material called a pinstripe and generally used for decoration. 

In this modern era, pinstripes are found mostly on motorcycles, trucks, boats, and even surfboards.

You can use paint pin-striping to create custom looks on the bodies and parts of your motorcycles and other gears.

Types of Pin-striping:

  • Mechanical Pin-striping
  • Tape Stripes
  • Free-hand Striping

Pin-striping is one of the best ways to make a vehicle wholly unique and construct a customized motorcycle helmet. The stripes can be as plain or as fancy as patience and level of skill allow.

PROCESS OF TAPE STRIPING YOUR MOTORCYCLE HELMET

Here we are highlighting the process of pin-stripe your motorcycle helmet in 7 steps:

  1. Make a vertical line using white tape and slightly curved with a grid based on the up to six half-box.
  2. Create Flower Buds following the same pattern.
  3. Form a leaf-like pattern.
  4. After forming leaves pattern, pull the tape down to through 5 boxes to the left and right direction to the right.
  5. Create a large leaf pattern with horizontal box size 4 & 6 vertical boxes.
  6. Draw the horizontal line at the bottom.
  7. After completing the abstract pattern, use red tape to decorate the design.

AIRBRUSH YOUR HELMET

It is no secret; air-brush a helmet is an excellent way to express your personality and sense of creativity. Airbrush your motorcycle helmet can transform this vital piece of safety gear into a striking accessory.

Air-brushing your helmet can also save your old helmet from fading and give it a new look.

Before you start airbrushing and customizing your motorcycle helmet, let us enlist the few tips that will help you create a custom motorcycle helmets.

  • De-assemble your helmet
  • Masking & Priming
  • Base Coat & Airbrush Paint
  • Flames
  • Clear-Coat & Finish

Materials Needed for Airbrush your helmet:

  • Airbrush Compressor
  • Dual Airbrush Gun
  • Masking Tape
  • Airbrush Paint Reducer
  • Clear Coat
  • Flames Stencils

Let’s have a sneak peek over the process of creating a custom motorcycle helmet through an airbrush.

De-assemble your helmet: Now remove all parts you won’t airbrush, including the air vents, visor, and a chin strap.  You can use a screwdriver or pop out some of these pieces.

Now start sanding your helmet to remove the original varnish on the body shell. And if there are any deep grooves, scratches, or imperfections –use lower grit paper sandpaper to smooth out.

Masking & Priming: This process involves masking those parts you won’t airbrush. Take your masking tape and cover off anything that does not require painting. It recommended to tape-off trims, air-vents, and especially cushioning within the helmet.

Now use the everyday primer to prepare coats–that will prevent the absorption of subsequent layers of paint.

Base Coat & Airbrush Paint: Once your helmet’s outer shell got dry, pick a black flat paint spray for the helmet.

Now pick up dual-action airbrush gun, and practice a few things before you airbrush your helmet. Add some reducer to the airbrush paint so it won’t get so thick.

Flames: Now place your desired flame stencils against the helmet, and start spraying. Spray in different shapes to create different angles in the fire.

Now use any picture, you want to print on your helmet. Put the picture on the helmet, and lightly spray the edges of the image to portray the border.

Clear-Coat & Finish: Once you are done with airbrushed picturing, now add several layers of clear coat –between 8-10 light coats.

Let your helmet dry, remove the masking tape. Best to leave the mask out to air for a whole week –it will get rid of paint fumes.

Reassemble all parts; visor, vents, caps, screws, and more.

If you want to outshine the game and display that extra swag, you can also add or wear a mask along with your helmets.

Are you wondering, what are the kinds of face mask you can put-on?

Here is the list featuring the types of face-masks:

  • Leather Face Masks
  • Neoprene Face Masks
  • Balaclava
  • Bandanna
  • Hard Plastic Face Masks

From custom painting to stickering to putting helmet skin to pin-stripping a helmet to air-brushing, we covered all innovative ways to construct a custom motorcycles helmet. Moreover, you can customize your bicycle helmets too and it will give you a cool look

Leave a Comment